trokut

    Please Submit Form & Get Pdf

    Download PDF
    AROONA STAR zoom

    Hover

    AROONA STAR
    Full Screen

    AROONA STAR

    Upgrading your Multimode fiber to single mode fiber AROONA-STAR

    Many Local Area Networks (LANs) are cabled with multimode fibers (MMF) that are limited in bandwidth. The transmitted throughput cannot exceed 1 Gb/s or even 100 Mb/s and therefore does not meet the growing demand for increased network bandwidth. The various solutions offered by the AROONA series make it possible to overcome these limitations and transmit tens of Gb/s over an existing multimode fiber structured cabling infrastructure just by installing a simple box.

    Overview

    AROONA STAR

    Many Local Area Networks (LANs) are cabled with multimode fibers (MMF) that are limited in bandwidth. The transmitted throughput cannot exceed 1 Gb/s or even 100 Mb/s and therefore does not meet the growing demand for increased network bandwidth. The various solutions offered by the AROONA series make it possible to overcome these limitations and transmit tens of Gb/s over an existing multimode fiber structured cabling infrastructure just by installing a simple box.

    Key Features

     

    • Aroona start is a simple box to increase network bandwidth without replacing existing cabling infrastructure.
    • Up to 100 Gbps over distances of up to 10 km, compatible with OM1/OM2/OM3/OM4/OM5 fiber.
    • Installation only requires a simple fusion splicing.
    • Available in 2 versions (rack & compact module), from 2 to 24 fiber connections.
    • Passive solution, no power supply required.

    Specification

     

    PARAMETER AROONA-STAR
    Reach <800 m with device installed at one link end only
    <10 km with device installed at both link ends
    Fiber type Exists in 62.5/125 µm (OM1) or 50/125 µm (OM2/OM3/OM4/OM5)
    Number of fibers Exists in 1/2/4/8/12/24 fiber versions
    Device insertion losses <2 dB (typical: 1.5 dB)
    System capacity From 1 to 100 Gb/s* (typically: 10 Gb/s)
    Independent throughput on each fiber
    Wavelength 1250 nm – 1600 nm
    Transceiver compatibility Duplex or bidirectional single-mode transceiver (1000BASE-LX, 10GBASE-LR/ER/ZR, 25GBASE-LR/ER, 40GBASE-LR4/ER4, 100GBASE-LR4/CWDM4, etc.)
    Passive device transparent to communication protocol
    Packaging and connectors 19″ 1U rack for 4/8/12/24 fiber versions.
    LC/UPC connector on the front panel of the 19″ rack and unconnectorized multimode fiber on the rear panel to be spliced
    Compact module for 2 fiber version.
    ST/SC/LC-UPC connector on the single-mode side.
    Unconnectorized multimode fiber to be spliced
    Operating temperature -40°C to +70°C (ETSI EN 300 019-1-3 class 3.4)
    Transportation tolerance ETSI EN 300 019-1-2 class 2.3

    Get in Touch

    Please fill out the form and we will get back to
    you within 24 hours.

    Write to Us

    Our friendly team is here to help.

    info@trokutsolutions.com

    Call Us

    Our friendly team is here to help.

    (+91) (022) 40124404

    Reach Out to Trokut Solutions

    Welcome to Trokut Solutions. Please use this form to submit your enquiries

      Scroll to Top