Hover

DX Air-Cooled Series

DPSS, TEM00, Q-Switched Lasers With over 26 years’ experience and tens of thousands delivery since 1998, our diode pumped DX Air-Cooled Series nanosecond DPSS lasers deliver unmatched performance in a compact, air-cooled design. Engineered to lead the market, these lasers provide up to 10 W UV and 20 W green power, while the ultra-compact models offer 1 W UV and 2 W green. With their small footprint and efficient air-cooling system, the DX Air-Cooled Series seamlessly integrates into industrial micro processing systems, offering the perfect balance of power, precision, and adaptability for even the most demanding applications.

This legacy of proven reliability and innovation makes the DX Series ideal for critical applications such as micron-precision marking, solar cell processing, and more. If you’re looking for a laser solution that combines cutting-edge performance with a compact, dependable design, the DX Air-Cooled Series is your go-to choice.

Download Data Sheet Enquiry Now

Overview

The Photonics Industries DX-AC Series offers a compelling solution for applications from ultraviolet marking, specialty material micromachining, and additive manufacturing.

These fully air-cooled lasers deliver industry-leading performance in beam quality, stability, and precision control. This is achieved through Photonics Industries’ pioneering intracavity UV and Green harmonic technology, ensuring higher reliability and lower COO. The DX-AC Series achieves this high performance in a remarkably compact package. The all-in-one (AIO) design integrates all electronics within the laser head, eliminating the need for a separate controller or utility module and minimizing footprint. The laser is “plug-and-play” with a simple 15V power supply for ease-of-integration.

Specification

Specifications – DX-AC Series
Specification	DX-532-2	DX-532-10	DX-532-15	DX-532-20
Wavelength	532nm
Average Power	2W @ 50kHz	10W @ 50kHz	15W @ 50kHz	20W @ 70kHz
Pulse Energy @ 50kHz	~40μJ	~200μJ	~300μJ	~400μJ
Pulse Width @ 50kHz	~10-15ns
Pulse repetition rate¹	Single shot to 300 kHz
Pulse-to-pulse stability²	<2% rms
Long-term power stability³	<2% rms
Beam spatial mode & M²	TEM₀₀ – M² <1.1
Beam divergence (nominal)	~2.5 mrad			~4 mrad
Beam diameter at exit (nominal)	~0.5mm			—
Beam roundness	~90%
Beam pointing stability	<20 μrad
Polarization ratio	Vertical; >100:1
Operational Specifications and Characteristics
Interface	RS232, Ethernet, Software GUI, External TTL Triggering
Warm-up time	< 5 minutes from standby, <10 minutes from cold start
Electrical requirement	100-240 V AC – 15 V DC, 13.4 A [PSU Included]
Line frequency	50-60 Hz
Power consumption	~50W	~130W
Dimensions	9 x 5 x 3.38 in	11 x 5 x 5 in [279.4 x 127 x 127 mm]
Weight	~10 lbs [~4.5 kg]	~15.5 lbs [~7 kg]
Environmental Requirements
Ambient temperature⁴	15°C to 30°C (59°F to 86°F) Operating Range
Humidity	Relative humidity 0% to 80% max, non-condensing
Storage conditions	-10°C to 40°C; sea level to 12000 m
Storage Humidity	0% to 80% relative Humidity, non-condensing
Cooling system	Air-Cooled / Base Plate Cooled⁵

Specification	DX-355-1	DX-355-5	DX-355-8	DX-355-10
Wavelength	355nm
Average Power @ 50kHz	1W	5W	8W	10W
Pulse Energy @ 50kHz	~20µJ	~100µJ	~160µJ	~200µJ
Pulse Width @ 50kHz	~10-15ns
Pulse repetition rate	Single shot to 200 kHz
Pulse-to-pulse stability	<2% rms
Long-term power stability	<2% rms
Beam spatial mode & M²	TEM₀₀ – M² < 1.1
Beam divergence (nominal)	~2.5 mrad
Beam diameter at exit (nominal)	~0.3mm	~0.4mm
Beam roundness	~90%
Beam pointing stability	<25 urad
Polarization ratio	Vertical; >100:1

Operational Specifications and Characteristics

Interface	RS232, Ethernet, Software GUI, External TTL Triggering
Warm-up time	< 5 minutes from standby, <10 minutes from cold start
Electrical requirement	100-240 V AC – 15 V DC, 13.4 A [PSU Included]
Line frequency	50-60 Hz
Power consumption	~50W	~130W
Dimensions	9 x 5 x 3.38 in	11 x 5 x 5 in – [279.4 x 127 x 127 mm]
Weight	~10 lbs [~4.5 kg]	~15.5 lbs [~7 kg]

Environmental Requirements

Ambient temperature	Ambient 15°C to 30°C (59°F to 86°F) Operating Range
Relative humidity	0% to 80% max, non-condensing
Storage conditions	-10°C to 40°C; sea level to 12000 m
Humidity	0% to 80% relative Humidity, non-condensing
Cooling system	Air-Cooled / Base Plate Cooled

Key Features

Up to ~400uJ Pulse Energy at 50 kHz .
True TEM00 Output .
Short Pulse Widths .
Air-cooled with Base Plate Cooled Option .
Robust & Compact Form Factor .
Dynamic Pulse Energy Control – PEC .
Position Synchronized Output – PSO .
Power Monitoring and Self-Calibration .

Applications

Marking & Scribing .
Silicon, PERC and Solar Cell .
PCB & Polymer Cutting & Drilling .
Selective Annealing and Doping .
Copper & Gold Sintering .
Gold & ITO Scribing .
Resistor Trimming .
LIDAR & Laser Ranging .

Get in Touch

Please fill out the form and we will get back to
you within 24 hours.

Write to Us

Our friendly team is here to help.

info@trokutsolutions.com

Call Us

Our friendly team is here to help.

(+91) (022) 40124404

Please Submit Form & Get Pdf

DX Air-Cooled Series

Overview

Specification